
What does a double-acting hydraulic cylinder do?
Release Time :
2025-01-26
Double-acting hydraulic cylinders are bi-directional systems. Here, pressure is applied on both sides of the hydraulic cylinder. This design allows for both extension and retraction motions, providing versatility and efficiency for your various applications. This machine provides better control and accuracy for your application.
Double-acting hydraulic cylinders are able to pump hydraulic oil to both sides of the plunger. Connection ports located near both ends allow the piston rod to move forward and backward. The additional ports also provide better control of the plunger during retraction and ensure that it always returns to its starting point.
Double-acting cylinders can apply force in both directions. The piston cylinder is divided into two pressurized chambers, allowing the rod to achieve outward and backward strokes. Pressurized oil can move the rod in either direction.
Double-acting cylinders have faster and more predictable retraction speeds, making them a better choice for projects that require repeatable accuracy.
RELATED NEWS
2025-02-12
What are the applications of cylinder?
In industry, cylinder gases are essential for processes such as welding and chemical reactions. In healthcare, they support patient care. In food packaging, they extend shelf life, and in laboratories, they enable precise experiments. These···
2025-02-12
What is the function of hydraulic lock?
A hydraulic lock, also called a water lock or hydrostatic lock, is when fluid enters the cylinder of a hydraulic system and restricts its compression. Since most fluids do not compress effectively, excess fluid in the cylinder can cause the···
2025-02-12
Why do many hydraulic applications require the cylinder to be locked?
Locking cylinders are used to provide additional safety and control, especially for applications where loads must be held for extended periods of time without continuous hydraulic pressure. For example, in cranes, aerial work platforms or h···
2025-02-12
How do you adjust the pressure on a hydraulic power unit?
Adjusting the output pressure of a hydraulic pump is very important, especially for a lawn mower. Even if you know what type of engine you have, you must make sure that your engine can operate at that pressure. The mechanical parts and sett···
2025-02-12
How to reduce hydraulic pressure?
Hydraulic shock occurs when the oil in a hydraulic system starts or stops flowing quickly. In systems with pressures below 3,000 psi, the oil in the pressure line typically flows at 15-20 feet per second. In systems with pressures above 3,0···
2025-02-12
How to measure bore and stroke of a hydraulic cylinder?
Retracted Cylinder Length: Measured from the center of the rod pin to the center of the cylinder pin when the cylinder is fully retracted (closed center).Extended Cylinder Length: Measured from the center of the rod pin to the center of the···

GET YOUR FREE QUOTE
We will contact you within 24 hours. ( WhatsApp/facebook:13665121168)